Product ID:GALVA-TECH KIT 1, 10590010
MSDS Date:04/11/1991
FSC:3439
NIIN:00N055599
MSDS Number: BWBLZ

X-ERGON DIV OF NCH CORP

IRVING, TX 75015
US

Emergency Phone: 214-438-1381

Info Phone: 214-438-1381

Preparer: LINDA M. SILAS

Cage: 55649

X-ERGON A PARTSMASTERS CO DIV NCH CORP

152170 IRVING, TX 75015 US

Telephone: 972-438-1381

Cage: 55649

IRON

CAS: 7439-89-6

RTECS: NO4565500

OSHA PEL 10 MG/M3 (MFR)

ACGIH TLV: 5 MG/M3 (MFR)

CALCIUM CARBONATE

CAS: 1317-65-3

RTECS: EV9580000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 10 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

ALUMINUM OXIDE

CAS: 1344-28-1

RTECS: BD1200000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

AS THE PRESENCE OF CONTAMINANTS IN ATMOSPHERE WHEN

RTECS: 9999999ZZ

GENERATED ARE DIFFERENT IN PERCENT & FORM FROM LISTED

RTECS: 9999999ZZ

INCL THOSE ORIGINATING FROM VOLATILIZATION, REACTION

RTECS: 9999999ZZ

COATING, ETC.

RTECS: 9999999ZZ

AREA. TRAIN WELDER TO KEEP HIS/HER HEAD OUT OF THE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: FUMES & GASES CAN BE DANGEROUS
TO HEALTH. SHORT TERM OVEREXPOSURE TO WELDING FUMES MAY RESULT IN
DISCOMFORT SUCH AS DIZZINESS, NAUSEA OR DRYNESS OR IRRITATION OF
NOSE, THROAT OR EYES. WELDING A RC MAY DAMAGE EYES. ELECTRICAL ARC
CAN KILL. CHRONIC: LONG TERM OVEREXPOSURE MAY LEAD TO SIDEROSIS
(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: (IRON DEPOSITS IN LUNG) & IS BELIEVED
BY SOME INVESTIGATORS TO AFFECT PULMONARY FUNCTION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE FROM EXPOS AREA & CALL FOR MED AID. ADMIN
RESPIRATION. IF NO DETECTABLE PULSE, BEGIN EXTERNAL HEART MASSAGE.
EMPLOY FIRST AID TECHNIQUES RECOM BY AMERICAN RED CROSS. IN CASE OF
ELEC SHOCK , TURN OFF POWER PRIOR TO REMOVAL FROM EXPOS AREA &
ADMIN AID. EYES:FLUSH W/WATER FOR AT LEAST 15 MIN. SKIN:REMOVE
CONTAMD CLTHG. WASH SKIN W/SOAP & WATER. INGEST:DO NOT INDUCE
VOMIT. OBTAIN MED ATTN.

Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SEE AMERICAN NATL STD Z49.1, SAFETY IN WELDING & CUTTING & OSHA
PUBLICATION 2206 (CFR 192-1910).
Unusual Fire/Explosion Hazard:NON-FLAMMABLE: WELDING ARC & SPARK CAN
IGNITE COMBUSTIBLES.

Spill Release Procedures:PICK UP PRODUCT. SWEEP AREA.
Neutralizing Agent:NOT ACCPLICABLE.

Handling and Storage Precautions:NOT APPLICABLE.
Other Precautions:WELDING ARC & SPARK CAN IGNITE COMBUSTIBLE MATERIALS.
THESE PRODUCTS SHOULD BE REMOVED FROM THE WORK AREA.

Respiratory Protection:USE NIOSH/MSHA APPROVED FUME RESPIRATOR OR AIR
SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL
EXHAUST VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:USE ENOUGH VENT, LOC EXHST AT ARC OR BOTH TO KEEP FUMES &
GASES BELOW TLV'S IN WORKER'S BRTHG ZONE & THE GENERAL (ING 9)
Protective Gloves:WELDER'S PROTECTIVE GLOVES.
Eye Protection:PROTECTIVE WELDING LENS, #10 OR DARKER.
Other Protective Equipment:PROTECTIVE CLOTHING SUCH AS LEATHER APRONS,
ETC.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS: PROCESS, PROC & FILLER METAL BEING USED. OTHER CNDTNS
INFLUENCING COMPOSITION & QTY OF FUMES & GASES TO WHICH WORKER MAY
BE EXPOSED INCL COATINGS ON METAL BEING JOINED, NUMBER OF WEL DERS
& VOL OF WORK SPACE, QUALITY & AMTOF VENT, POSITION OF OPERATOR'S
HEAD IN RELATION TO FUME PLUME AS WELL (ING 5)

HCC:N1
Solubility in Water:INSOLUBLE
Appearance and Odor:LIGHT BROWN/GREY METAL; NO ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
NONE.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:WELDING & BRAZING FUMES CANNOT BE
CLASSIFIED SIMPLY. COMPOSITION & QTY ARE DEPENDENT UPON METAL BEING
JOINED, (SUPDAT)

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.